800 Meters Capacity

The drilling machine can be described briefly as a rig mounted on a trailer.

In large drilling equipment, the functions carried out by the individual machines are combined in the drilling machines and made possible by a machine. Rotary drilling machines are mainly used for water, surveying and mining purposes. The drilling process starts at the point which is found to be the most efficient in terms of groundwater.

Then, when the intended depth is reached, the drill and drill pipes (tij) are taken out and the well is taken into the casing with a diameter smaller than the diameter of the drill, and the well wall and the casing pipe are filled with washed and sieved granulated drilling pebbles. Then the well is cleaned and developed (with compressed air, piston, etc.) is made ready for use.

TECHNICAL SPECIFICATIONS

IT WILL BE MOUNT ON TRAILER
Dimensions of 3-Axle Trailer
Length 13.60 meters
Width: 2.80 meters
Height: 1.50 meters
Chassis Thickness is 500 mm
Trailer has 6 wide-wheels and 1 spare tire.
  1. MAST
Mast Load Capacity 70 tons
Mast Pipes Diameter and Thickness 4”inches- 6mm

Dimensions of the Mast

Length: 14.5 meters
Rear Width: 1.80 meters
Height: 1.15 meters
Ground Clearance of Mast is 16 -17 meters
  1. DECK ENGINE
Single Diesel Deck Engine will be mounted on the Rig.
Deck Engine is 361 hp.
Deck Engine is Turbo Intercooler MAN.
Engine Transmission is 90 ZF and Clutch Plate diameter is 42 cm.
  1. POWERTRAIN SYSTEM
Transfer Case is with two transmissions.
Transmissions are 90 ZF and diameter of Clutch Plate is 42 cm.
Transfer Case will have 7 transfers Output.
Chains of Transfer Case are 1” and 4 roller.
Transfer Case is with 1”-quadruple sprocket
Drive Shafts are big type Total Number of Drive Shafts is 5.

4. DRAW-WORKS

Two piece – Mechanical Double Drum Draw Works will be mounted abreast (side by side) on the Rig.
Drums diameter is 580 mm.
Brake Drums diameter is 600 mm
Each Drum has 5 pcs Gear tooth Facings.
These Gear tooth Facings outer diameter is 480 mm, thickness is 16mm And number of teeth is 75
Draw-works hook load capacity is 50 tons.
  1. ROTARY TABLE
Dimensions of the Rotary table
Inner Diameter 230 mm
Median Diameter 700 mm
Outer Diameter 1000 mm
Rotary Table Ground Clearance 160cm 220 cm (max)
Rotary Table bottom and top seals are buried for air-system
Heavy duty fabricated frame
Rotary load capacity is 60 tons.
Rotary rotation speed (as Deck Engine rotation speed is 330 rpm):
First gear 25 rpm
Second gear 35 rpm
Third gear 60 rpm
Forth gear 90 rpm
Fifth gear 125 rpm
Sixth gear 155 rpm
Reverse gear 20 rpm
  1. SWIVEL AND KELLY BAR
    1. Swivel
Swivel load capacity 60 tons
Swivel Pipe diameter 3inches
Swivel is made of Steel
  1. Kelly
Kelly Bar is US-Made, 4 corneres
Kelly Bar length is 11 meters
Pulley blocks of Kelly bar are with 4 wheels and 8 ropes
Pulley blocks of Kelly bar are with 4 wheels and 8 ropes
  1. CIRCULATION SYSTEM
    1. Mud Pump
One Piece 6X8 Mud Pump will be on theRig Mud Pump Flow Rate is 1450 lt/min
Mud Pump Suction Line diameter is 4 inches and discharge line diameter

is 3 inches and discharge pipe outlet diameter is 1.5 inches

Length of Discharge Hose is 10 meters
There will be one piece -5 inches Valve and 6 meters- 4 inches water suction hose- with Mud Pump
  1. CentrifugalPump
One piece SP3 Centrifugal Pump will be mounted on the Rig.
Centrifugal Pump water Suction Line diameter is 4inches and discharge line diameter is 3inches. Centrifugal Pump discharge pipe outlet diameter is 1.5inches
Length of Discharge Hose is 10 meters
There will be one piece- 4inchesValve and 6 meters- 4 inches water suction hose-with Centrifugal Pump
Water Pressure Hoses of the Rigis 3 inches in diameter

and 2-wired metal pressed

  1. HYDRAULIC SYSTEM
Total Numberof Hydraulic Lifts on the Rig is 8.
Two Hydraulic Lifts for lifting up Rig-Mast.
Four piece Leg-Lifts for getting fixed and lifting up theRig.
Front and rear legs of the Rig are double- legged and hydraulic lifts will be in the middle of these two legs.
Two piece Hydraulic Lifts for sliding Rotary Table for ward and back
Volume of hydraulic pump is 80 liters And oil pressure hoses will be 2 wired
  1. ELECTRIC POWER SYSTEM
One piece 100 KW Alternator will be on the Rig
360 AmpWelding Machine will be mounted
Total Number of Lightning Projectors is 5 and Lightning Distance is 25 meters
Control Panel will have Engine Start& Stop Button, heat and oil indicator
  1. CROWN BLOCK AND DRILL-LINE SYSTEM
Crown Block diameter is 42 cm
Total Crown Block Number is 10
Lines Diameter is 20 mm and 6×36
Total Length of Lines is 300 meters
  1. AUXILIARY PARTS
One piece Manual Tong
One piece Pipe-Vise
One piece Hoisting Plug
One Piece Pipe- Slip
One piece 8½”,12½” and 17½” Drilling Sub (Coupling Sleeve)
  1. ACCESSORIES& PAINTING
Walking Platform will be built along two side of the Rig
Three Piece Tool- Boxes
One piece Engine Cabin
Acrylic and Seawater Resistant Paint
Rig will be get painted according toBuyer’s Color Choice
  1. CONDITIONS OF WARRANTY
Acarkardesler Drilling Company’s warranty is valid against all sort of manufacturing faults for one year.
This warranty does not cover User-Originated faults
Manufacturer is going to be come with every exported- drilling rig for only 10 days to control all working –drilling system and training
Acarkardesler Drilling Company will help to customer in the matter of

providing full time drillers for determined fee

  1. PAYMENT AND DELIVERY TERMS
ACR800 meters Depth Drilling Rig will be delivered in operation
Payment Plan for ACR800 meters Depth Drilling Rig is

%100 L/C OR T/T Irrevocable.

Delivery Terms : FOB OR CFR